Shared storage your editors can work from
Creative work outgrows cloud sync quickly. Footage ends up copied to local drives, project files fork into "final_v3", and anyone working from home waits on a download before they can start. We design and set up Synology storage on a fast wired network, so the whole team works from one copy of every project, in the office or away from it.
What we build
A 10GbE network as the starting point. For 4K video, 3D renders and large design files we specify 10GbE from the NAS to every edit seat, and 25GbE for 8K or several people editing multi-stream at once. On segments wired end to end we turn on jumbo frames, which we have seen make a large difference to big sustained transfers between Macs and Synology.
Remote access without a VPN. We usually connect the NAS and your team's Macs with Tailscale, so the same shares open from home, a client's office or a shoot, and the NAS is never exposed to the internet. Its admin pages move off their default ports too.
Backups that survive ransomware. A second NAS on site for fast recovery, plus an automated copy in the cloud. RAID keeps the volume running through a failed drive, and if a whole unit fails, the second NAS or the cloud copy brings you back.
Permissions that match your projects. Shares and access are set per team and per client, so freelancers see what they need and nothing else. Finished jobs move to an archive and stop filling the live volume.
Room to grow. Capacity is sized for your real project volumes, with space to add drives or an expansion unit later without migrating.
How it works
Week 1: Discovery. We look at how your team works, how much data you have and how fast it grows.
Week 2: Design and specification. You get a specification with the right capacity, speed and redundancy, and a shopping list. You buy the Synology hardware and network kit direct, so the kit and its warranty are yours.
Week 3: Set-up. Installation, network configuration, permissions, backups and a restore test, then a short session with your team. The cutover is planned around your deadlines.
Afterwards. Automated monitoring of disks, capacity and backup jobs, routine maintenance, and a capacity review every quarter.
Why Stabilise
We look after Mac-first creative teams day to day, so the storage is set up around Final Cut, Premiere, DaVinci Resolve and Adobe Creative Cloud, and the people using them. We are London based, with on-site visits across Zones 1 to 3. The detail of how we configure Synology for Macs is in our Synology best practices guide.
Frequently Asked Questions
How fast is fast enough? For 4K video, 3D renders or large design files we specify 10GbE as the minimum. For 8K, or several people editing multi-stream at once, 25GbE.
What happens if the NAS fails? A single failed drive does not stop work: RAID keeps the volume running while the drive is replaced. If the whole unit fails, you switch to the second NAS on site or restore from the cloud copy. How long that takes depends on how much data you have, which is why we test a restore during set-up.
Can the team get to files from home? Yes. The same shares open from home, a client's office or on location over Tailscale, without a traditional VPN and without opening the NAS to the internet.
Do you work with brands other than Synology? We can. Synology is the platform we know deepest and the one we recommend for most creative studios, because it balances speed, reliability and cost well.
Do you sell the hardware? No. We specify it, you buy it direct, and we install and configure it. The kit and its warranty stay yours.